I’d like to thank Nathan and the team at Wendy’s Broadcadst for all their help. They have been supplying me with custom cables, made to the highest standard over many year. The low profile connectors are hard to find, yet they normally ship the finished leads the day after ordering, often to studios or locations where I am filming and I’ve never had to ask for any adjustments or corrections; They are right first time, despite my requiring some unusual bespoke wiring. I’ve also benefited from real world advice about products and fault finding. Wendy’s Broadcast have made location sound far less stressful.
The RØDE Lavalier is a discreet lapel microphone that provides broadcast-quality audio when close-miked in almost any scenario.
The Lavalier's low self-noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.
The microphone capsule is connected via a 1.2m (4') shielded, Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the included cable management clips ensure that you are able to minimise the microphone and cable visibility, while providing maximum mobility for the wearer.
The supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the Lavalier and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE Lavalier lapel microphone is designed and made in Australia and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover,
Acoustic Principle |
Permanently Polarized
|
Active Electronics |
JFET impedance converter
|
Capsule |
0.10"
|
Address Type |
End
|
Frequency Range |
60Hz - 18kHz
|
Output Impedance |
3000Ω
|
Maximum SPL |
110dBSPL
|
Maximum Output Level | 189.0mV (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity |
-33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
|
Equivalent Noise (A-weighted) |
25dBA
|
Warranty |
1 year with free extension to 5 years following registration here
|
Weight (g) |
1.00g
|
Cable Length |
1200mm
|
Dimensions |
12.00mmH x 4.50mmW x 4.50mmD
|