I just wanted to put in writting my appreciation for everything your company has done for me recently. The replacement for my 664 mixer arrived today and is working perfectly. Please pass on my thanks to Matt for his patience, expert help and the guidance he has provided despite me phoning, in a panic, from various locations around the world. Thanks to you all for going beyond the call of duty, the level of service has been absolutely fantastic!
Streamline your bag with the SL-2 Dual SuperSlot Wireless Module. This two slot-in wireless receiver integration system easily mounts to the top panel of any 8-Series mixer-recorder. UniSlot and SuperSlot™ wireless receivers from a variety of manufacturers are accepted, including Audio Ltd, Lectrosonics, Wisycom, and Sennheiser. The SuperSlot protocol supports up to four channels of wireless audio per slot.
An 8-Series mixer-recorder supplies power to the SL-2 and slotted-in receivers – no external DC connector needed. Analog or digital audio is sent from the receivers into the mixer-recorder via the expansion port, reducing messy cabling for power and audio connectivity. The SL-2 offers antenna distribution to slot-in receivers, spreading out the placement of antennas for better RF performance. The rear panel of the SL-2 is equipped with two TA3 connectors for an additional four inputs of AES3 audio and two 4-pin Hirose DC Outputs, each supplying up to 500 mA for powering additional equipment.
Features
Which SuperSlot Receivers Are Supported By SL-2?
SuperSlot is an open standard. Wireless receivers from several manufacturers are supported, allowing you to use your favorite brand, as well as leveraging your existing transmitter and receiver investment:
FAQ's and additional information can be found on the Sound Devices Website.
What's In The Box
Powering | All power supplied by host 8-series machine |
---|---|
Antenna | |
Antenna Impedance | 50 ohms |
Antenna Powering | 12V at 200 mA, menu selectable on/off Serial remote control, Wisycom-compatible for ADFA and LFA powered antenna etc. |
Antenna Pre-select Filters | Menu selectable: Wideband/bypass (low pass filter 1.7 GHz upper cut-off) 470-614 MHz 542-694 MHz 606-770 MHz 770-960 MHz |
Input RF Attenuators | 0 to -1 8dB, in 6 dB steps, menu selectable |
RF Outputs | Auxiliary Antenna Outputs for additional receiver |
DC Outputs 1-2 | 500 mA max (each), 6-18 VDC passed through from host 8-series machine, depending on power source. Hirose 4-pin connector: pin 4 = +, pin 1 = ground. |
Aes Inputs | Two pairs for a total of four channels, AES-3 balanced, 110 ohms, TA-3 connectors |
Dimensions | H x W x D 4.5 cm x 21.3 cm x 13.1 cm (1.8 in x 8.4 in 5.1 in) |
Weight | 1.35 lbs (unpackaged) 0.61 kg (unpackaged) |