I just wanted to put in writting my appreciation for everything your company has done for me recently. The replacement for my 664 mixer arrived today and is working perfectly. Please pass on my thanks to Matt for his patience, expert help and the guidance he has provided despite me phoning, in a panic, from various locations around the world. Thanks to you all for going beyond the call of duty, the level of service has been absolutely fantastic!
The d:screet CORE 6060 and 6061 Subminiature Microphones and the 6066 d:fine CORE Subminiature Headset Microphone are just three millimetres in diameter – two millimetres smaller than DPA’s existing 4000 series of miniature microphone products. All three incorporate the recently launched CORE by DPA amplifier technology that reduces distortion and increases dynamic range, while they may be small, they pack a powerful punch in terms of performance.
Looking to minimise distortion as well as increase the dynamic range (DPA measures this as the range between the noise floor and the point where the mic reaches 1% THD), or workable area, of its d:screet™ and d:fine™ lines of microphones, DPA developed this new amplifier to create an even clearer sound from the ‘highest of the highs’ to the ‘lowest of the lows.’ The dynamic range has been expanded in all of DPA’s ‘CORE’ miniature capsules.
When it comes to the technical specs, all three 6000 series capsules are omnidirectional and have a frequency range of 20 Hz – 20 kHz. The d:screet™ 6060 Lavalier has a noise floor of only 24 dB(A), while the d:screet 6061 Lavalier and d:fine™ 6066 Headset have noise floors of only 26 dB(A). This is similar to DPA’s existing 4000 series miniature mics. All three capsules are available in black and beige.
Stainless steel construction makes the mics in the 6000 series extremely durable. They can tolerate high temperatures and they’re resilient against impacts and resistant to abrasion. The subminiature mics use the same size cable as on DPA’s 5 mm mics. The cables are extremelty durable, do not become entangled and withstand rough pulls.
The new DPA CORE 6000 series omnidirectional microphones will also provide water and moisture resistance through nano coating and hermetic sealing of the sensitive electronics. The microphone is currently available in Black, Beige, Brown and White. Click Here to see all variants
For a wireless microphone, choose between an adapter system (Microdot), or a hardwired connector (See Below)
Radio Mic | Connector Type | Additional Delivery Time* |
Audio Ltd 2040 | 6 pin Lemo | Allow additional 1 - 2 business days |
Audio Ltd Mini Tx | 4 pin Lemo | Allow additional 1 - 2 business days |
Audio Ltd EN2 | 5 pin Binder | Allow additional 1 - 2 business days |
Audio Ltd EN2 / Sennheiser EW | 3.5mm Locking Jack | Allow additional 1 - 2 business days |
Lectrosonics | TA5 | Allow additional 1 - 2 business days |
Micron | .0B 6 Pin Lemo | Allow additional 1 - 2 business days |
Sony UWP | 3.5mm Locking Jack | Allow additional 1 - 2 business days |
Sony UWP Pro | 4 pin Locking | Allow additional 1 - 2 business days |
Sony Digital | 4 Pin Hirose | Allow additional 1 - 2 business days |
Wisycom / Sennheiser 3000/5000 / Audio Ltd A10 | 3 pin ODU | Allow additional 1 - 2 business days |
* Please contact us if your request is urgent, we may be able to solder your connector immediatley.