I just wanted to put in writting my appreciation for everything your company has done for me recently. The replacement for my 664 mixer arrived today and is working perfectly. Please pass on my thanks to Matt for his patience, expert help and the guidance he has provided despite me phoning, in a panic, from various locations around the world. Thanks to you all for going beyond the call of duty, the level of service has been absolutely fantastic!
Complementing its already great sound, DPA Microphones is excited to announce the launch of CORE, a new amplifier technology that lives within its line of new miniature lavalier and headset microphones. With solutions that provide clear, natural sound, DPA Microphones is known throughout the pro audio, recording and broadcast industries as the best mic’ing option for any application. Now with DPA CORE mics it has made these solutions perform even better.
DPA d:screet™ CORE 4071 Omni Lavalier Microphone is acoustically identical to the d:screet™ 4060 Mini Omni Mic, but features a presence boost of typically 5 dB at 4 to 6 kHz. This microphone will be able to handle sound pressure levels (SPLs) of up to 144 dB before clipping occurs.
This presence boost is an essential for a chest-placed microphones due to the frequency range of words spoken being dampened in this position. The d:screet™ CORE 4071 maximises speech intelligibility. The mic also has an acoustic low-cut at 100 Hz to remove any unwelcome rumble noise.
Given that the mic is optimised for speech, the d:screet™ CORE 4071 is appropriate for news crews, in-studio reporters and when the mics are needing to be concealed under clothing.
This mic is available in three colours: black, beige and white
For a wireless microphone, choose between an adapter system (Microdot), or a hardwired connector (See Below)
Radio Mic | Connector Type | Additional Delivery Time* |
Audio Ltd 2040 | 6 pin Lemo | Allow additional 2-3 business days |
Audio Ltd Mini Tx | 4 pin Lemo | Allow additional 2-3 business days |
Audio Ltd EN2 | 5 pin Binder | Allow additional 2-3 business days |
Audio Ltd EN2 / Sennheiser EW | 3.5mm Locking Jack | Allow additional 2-3 business days |
Lectrosonics | TA5 | Allow additional 2-3 business days |
Micron | .0B 6 Pin Lemo | Allow additional 2-3 business days |
Sony UWP | 3.5mm Locking Jack | Allow additional 2-3 business days |
Sony UWP Pro | 4 pin Locking | Allow additional 4-5 business days |
Sony Digital | 4 Pin Hirose | Allow additional 4-5 business days |
Wisycom / Sennheiser 3000/5000 / Audio Ltd A10 | 3 pin ODU | Allow additional 2-3 business days |
* Please contact us if your request is urgent, we may be able to solder your connector immediatley.
Directional characteristics: | Omnidirectional |
Principle of operation: | Pressure |
Cartridge type: | Pre-polarized condenser |
Frequency range ± 2 dB: | 100 Hz - 15 KHz with typ. 5 dB soft boost at 4 - 6 KHz |
Sensitivity, nominal, ±3 dB at 1 kHz: | 6 mV/Pa; -44 dB re. 1 V/Pa |
Equivalent noise level A-weighted: | Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) |
Equiv. noise level ITU-R BS.468-4: | Typ. 38 dB (max. 40 dB) |
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): | 68 dB(A) |
Total harmonic distortion (THD): | < 1 % THD up to 135 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine |
Dynamic range: | Typ. 97 dB |
Max. SPL, peak before clipping: | 144 dB |
Output impedance: | 30 – 40 ohm |
Cable drive capability: | Up to 300 m (984 ft) |
Power supply: | For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance |
Connector: | MicroDot |
Colour: | Black, beige or white |
Microphone weight: | 7.5 g (0.26 oz) incl. cable and MicroDot connector |
Microphone diameter: | 5.4 mm (0.21 in) |
Microphone length: | 17 mm (0.67 in) |
Cable length: | 1.8 m (5.9 ft) |
Polarity: | Positively increasing sound pressure produces positive going voltage on MicroDot pin |
Temperature range: | -40 °C to 45 °C (-40 °F to 113 °F) |
Relative Humidity (RH): | Up to 90% |