I just wanted to put in writting my appreciation for everything your company has done for me recently. The replacement for my 664 mixer arrived today and is working perfectly. Please pass on my thanks to Matt for his patience, expert help and the guidance he has provided despite me phoning, in a panic, from various locations around the world. Thanks to you all for going beyond the call of duty, the level of service has been absolutely fantastic!
The DWT-P01N XLR plug-on transmitter forms part of the DWX N series digital wireless microphone system that offers high-quality full-digital operation shorter audio latency and more reliable RF transmission mode - a perfect match for high-quality ENG/EFP applications.
The DWX N series system delivers superb-quality wireless transmission of 24-bit digital audio. Thanks to its improved codec and new hardware, it can provide higher sound quality with lower audio latency.
Low noise head amplifier
Low noise head amplifier achieves -128dBu noise floor.
Flexible audio input control
48dB at 3dB steps audio attenuation supported. Line / Microphone input supported. Transmitter audio attenuation can be controlled from receiver side using Sony wireless remote control system.
Flexible battery options
The DWT-P01N is able to accept a variety of AA type battery, such as Alkaline, Lithium, NiMH etc.
Selectable output power
Various output powers are selectable to provide the user with options for stable multi-channel or long distance operation. (1/10/50 mW)
Versatile display using organic LED display
A variety of information is obtained at a glance from the new OLED display panel, such as the reception channel, Audio and RF signal status, user name, user group, Lock etc.
Wireless remote control
A duplex wireless remote control system is supported. The DWT-B01N is able to be controlled via the DWR-S02DN receiver. Settings that are changed on the receiver are automatically sent and changed on the paired DWT-P01N transmitter.
Wide operating frequency ranges
DWT-P01N can operate over a 72Mhz frequency band.
Oscillator | Crystal controlled PLL synthesizer |
Carrier Frequencies: Americas (depending on model) |
UC14: UHF-TV channels 14-25 (470 - 542 MHz) UC30: UHF-TV channels 30-36 (566-608 MHz) and 38-41 (614-638 MHz) UC42: UHF-TV channels 42-51 (638-698 MHz) |
Carrier Frequencies: Europe, Middle East, Africa, Australia, New Zealand (depending on model) |
CE21: UHF-TV channels 21-29 470 MHz to 542 MHz CE33: UHF-TV channels 33-40 566 MHz to 630 MHz CE42: UHF-TV channels 42-50 638 MHz to 710 MHz |
Channel step | 25 kHz |
RF power output | 1 mW/10 mW/50 mW (e.r.p.) selectable |
Occupied RF bandwidth | 192 kHz or less |
Audio delay | Approx. MODE1: 1.5 msec (total: 3.4msec) /MODE2: 1.0 msec (total: 1.5msec)/MODE3: 2.1 msec (total 4.0msec) |
Maximum input level | MIC -22 dBu (with 0 dB attenuator) LINE +24 dBu |
Audio attenuator adjustment range (pad) | 0 to 48 dB (3-dB steps, MIC input mode only) |
Input connector | XLR-3-11C (female) (x1) |
Input impedance | 4.7 k/ohms or more |
Operating voltage | DC 3.0 V, (two LR6 AA-size alkaline batteries) |
Battery life | Approx. 5 hours (at 25 °C (77 °F), 10-mW output using Sony LR6 (AA)-size alkaline batteries with CODEC MODE set to MODE1, the wireless remote control function off, DIMMER MODE set to AUTO OFF, and +48 V set to OFF) |
Dimensions (W x H x D) | Approx. 44 x 78 x 44 mm (1 3/4 x 3 1/8 x 3/4 inches) excluding projection |
Mass | Approx. 245 g (9 oz) including batteries |
Supplied Accessories | Soft case (1) Spare battery case (1) adapter cable (1) CD-ROM (1) Before Using this Unit (3) |