Whenever I need to buy new kit this is the place to go. Wendy and her team have excellent knowledge of the equipment they supply, access to information from manufacturers about the kit and an attitude to genuine customer service that is not often found in today's globalised corporate world. I have dealt with all the main UK broadcast suppliers and buying from Wendy's is by far the best experience.
The CS-3e stands out among shotgun microphones because it maintains directivity over an extremely wide frequency range, especially in the low frequencies. Because of its unique design, the CS-3e is an excellent choice for use in difficult applications, such as close-to-ceiling positions or locations near a noisy camera. Even in such challenging situations, the excellent side and rear rejection of the CS-3e helps to capture only the targeted dialogue without ambient reverberation problems. The CS-3e delivers sharp directional sound even in the lower frequencies. Sanken's original design results in a low proximity effect which facilitates working in a scene close-up and wide, while producing little change in sound character.
In the CS-3e, three directional capsules are arranged in a front-back array to combine line microphone performance and second-order pressure gradient response in a single system. With this unique design, the CS-3e achieves phenomenal supercardioid directivity in the lowest frequencies and throughout the full range in a microphone only 27cm (10 inches) in length. It is significant that the CS-3e picks up the targeted frontal sound sources with exceptional clarity over a wide frequency range - even in noisy ambient environments or in long reverberation spaces - by rejecting undesired noise and sounds coming from the rear and sides.
Features
Directivity | Super Cardioid / lobar |
---|---|
Transducer | DC biased condenser |
Frequency range | 50Hz - 20kHz |
Sensitivity (nominal at 1kHz) |
50mV/Pa (-26dB,0dB=1V/Pa) |
Equivalent noise level (A-weighted) |
15dB-A |
Max SPL (1% THD) | 120dB SPL |
Output impedance at 1KHz |
120 ohms |
Powering | +48±4V phantom |
Current consumption | less than 3mA |
Weight | 120g |
Dimensions | 270mm X 19mm (diameter) |
Surface finish | matte black |
Connector | XLR-3M |
Included Accessories
Measurement data
Instruction manual
Warrant card
Vinyl case