Sound Devices A20-QuickDock

The A20-Nexus can be docked to Sound Devices 833, 888, or Scorpio mixer-recorders using the A20-QuickDock accessory. This provides convenient power, audio, and timecode connections with no additional cables. This accessory allows the A20-Nexus to connect and disconnect in seconds with no tools, and be remote mounted when desired.

When docked on an 8-Series:

• Power must be provided by the 8-Series – A20-Nexus power inputs (TA4 and PoE+) are disabled.
• The A20-Nexus and its Nexlinked transmitters are controlled from the A20-Nexus front panel or its web app. The 8-Series user interface is not used for control.
• Most A20-Nexus rear panel connectors are disabled apart from the antenna connectors, the USB-A port and the Ethernet ports.
• The USB-A port has the following capabilities when A20-Nexus is docked on an 8-Series:
• Pairing A20-Mini transmitters to the A20-Nexus by connecting a USB-C cable from the transmitter to the USB-A port.
• Attaching a USB keyboard for entering text directly (e.g. receiver channel names) into the A20-Nexus.
• Mounting a USB thumb drive for updating A20-Nexus firmware.
• Syncing 8-Series timecode to an A20-Mini via the A20-Nexus.
• When docked to an 8-Series, the A20-Nexus Ethernet ports can only be used for control, not Dante.

What included?

• Mounting plate with detachable Quick Release mechanism and multi-pin connector.
• 2 mm and 1/16” allen keys.
• Four 1/16” allen screws for securing the mounting plate to the bottom of the A20-Nexus. 
• Three long 2 mm and two short 2 mm allen mounting pillars for securing the rear of the A20-Nexus with mounting plate to the top of the 8-Series.