Can't find what you are looking for? Call our sales team on +44 (0)161 223 2200

Featured Products

Tentacle Sync

Timecode Sync E Single

Smyles

Comm-Biner Audio Interface

DPA

CORE 6000 Series

Sound Devices

A20 Digital Transmitter

Mini Control

Mini Control 2

Bubblebee

Sidekick Mono

Featured Brand

Why Choose WBS?

I’d like to thank Nathan and the team at Wendy’s Broadcadst for all their help. They have been supplying me with custom cables, made to the highest standard over many year. The low profile connectors are hard to find, yet they normally ship the finished leads the day after ordering, often to studios or locations where I am filming and I’ve never had to ask for any adjustments or corrections; They are right first time, despite my requiring some unusual bespoke wiring. I’ve also benefited from real world advice about products and fault finding. Wendy’s Broadcast have made location sound far less stressful.

 

Roderik Hart

AMPS IPS

DPA

4017C Shotgun Microphone

4017C

DPA 4017C Compact Supercardioid Microphone

1,130.00 ex vat 1,356.00 inc vat

QTY

Estimated delivery 2 - 3 Working Days

4017C Compact Shotgun Microphone

Keypoints for the 4017C Compact Shotgun Microphone:

  • Excellent RF Immunity
  • Lightweight
  • Uniform off-axis response
  • Highly directional

Setting new standards for compactness within shotgun microphones and their applications, the modular 4017C is an exceptionally short and lightweight interference tube microphone with high directionality. The tight polar pattern is very frequency linear and uniform. With the compact MMP-C pre-amp, booming applications such as in a car or in low ceiling rooms is uncomplicated. The total length of the microphone is as short as 15,4 cm (6.1 in), the weight at just 70 g (2.5 oz).


Also available with Rycote Windshield and suspension system, the 4017C-R is a fully packed and ready solution.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Directional pattern: Supercardioid, lobe-shaped
Principle of operation: Pressure gradient, with interference tube
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ± 2 dB, at 60 cm: 40 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 24 dB (max. 26 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 81 dB(A)
Total Harmonic Distortion (THD): < 1 % up to 133 dB SPL peak
Dynamic range: Typ. 120 dB
Max. SPL, peak before clipping: 146 dB
Output impedance: 100 Ω
Minimum load impedance: 2 kΩ
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 40 dB
Power consumption: 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Weight: 70 g (2.5 oz)
Microphone diameter: 19 mm (0.75 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 154 mm (6.1 in)
Output voltage, RMS: 4.5V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%

 

 

Sign up for our newsletter

Wendys Broadcast Services LTD, Unit 2 Medlock Court, The City Works, Manchester, M11 2NB Registered in England 21020497 Vat No GB 850 1613 57

web site by Steve Boyle